Mineral oil based water borne defoamer

For aqueous coatings, printing inks

Suitable for architectural coatings

Optimal effect at the lowest dosage

No silicon oil

Product Data:

Appearance: white to light yellowish liquid

Compositions: modified mineral oil

Storage and Transportation: between 10 °C and 35 °C; separation possible; mix well before use. The additive is not frost sensitive, although storage at 10- 25 °C is recommended

Shelf Life: 6 months

Special Features:

CDI-495 is a mineral oil based water borne defoamer; it contains no chemical listed in SVHC and REACH. Suitable for water borne architectural coating, water borne industrial coating, high gloss coating, inks, adhesives; no polysiloxane; no APEO ; high performance and low cost.

Benefits:

► Easy to disperse in water system

► Significantly hindered foam generating

► Fast defoaming; work remarkably well for micro foam; effect last long

► No silicon oil; no negative effect on recoatability

Recommend Levels:

0.1%-0.5%                                              

The above-mentioned levels are for recommendation only. Users should optimize the levels through their own testing.

Attentions:

It’s quite normal to observe separation and minor soft sedimentation after long time storage; please stir well before using; it has no negative effect to its performance; This product can’t be left open to the air for long time. The lost of water may lead to a dry layer at the surface, flocculation and viscosity increase. Thereafter user may not able to experience the best defoaming effect of the product.